RICK JACQUEMARD, Flatirons Home Inspections

RICK JACQUEMARD, Flatirons Home Inspections

BOULDER –  One of the most common issues found during a home inspection is missing GFCI receptacles or circuits. GFCI units are electrical outlets equipped with a ground fault sensor and a circuit breaker which senses a ground fault and is programmed to turn off the electric power to the electrical receptacle when danger is sensed. They should be found in all areas where a water source is present such as those located in kitchens, bathrooms and garages, as well as in unfinished basements, basement crawl spaces and outdoors.

GFCI units are easy to identify, they are equipped with test and reset buttons. When the test button is depressed, electric power to the receptacle is turned off; depressing the reset button restores electric power to the receptacle. It is good practice to test your GFCI units on a monthly basis to be sure that they are functioning properly. GFCI units that have not been tested on a scheduled basis may not reset after being tested and therefore, need to be replaced. Replacing or installing new GFCI receptacles in not a difficult or expensive process.

Some GFCI units may be located in the electric service panel; these units serve the same function as units located in the receptacles and should be similarly tested. One of these GFCI units in the service panel may serve all bathroom receptacles or other common locations. If, for instance, a bathroom has a non-GFCI receptacle, your inspector should be able to tell you if it is on a GFCI circuit.

For more information on home inspections contact Rick Jacquemard at 720.280.3544, e-mail [email protected] or visit www.flatironshi.com.

By Rick Jacquemard, Flatirons Home Inspections